表面粗糙度對照表的英文

重點詞匯

表面粗糙度───Surface roughness;對照表───Comparison table

雙語使用場景

Friction increases with increasing fiber surface roughness in the boundary and semiboundary.───在邊界和半邊界區內,摩擦隨纖維表面粗糙度的增加而增加.

The contribution of the guide surface roughness overshadows that of the fiber surface roughness.───導紗桿表面粗糙度的作用超過纖維表面的粗糙度.

Annual variation of surface roughness obtained from wind profile measurements.───根據風廓線測量獲得的地面粗糙度的年度變化.

It was also found the surface roughness in gas is better that in emulsion.───同時發現,在相同加工條件下,氣中加工的粗糙度普遍優于液中加工.

Understand the basic conception of form and position tolerance and surface roughness.───了解形位公差與表面粗糙度基本概念.

Results show that this process can reach surface roughness with angstrom dimension.───結果表明,這種拋光工藝能獲得原子級的超光滑表面.

At the beginning of machining, the metal is removed rapidly and the surface roughness descends quickly.───試驗還表明在加工初期具有較高的金屬去除率,表面粗糙度也下降較快.

The surface roughness increases first and then decreases as surface density increase.───表面粗糙度在兩個系統中都是隨著表面密度先升后降.

英語使用場景

Methods The surface roughness of 24 teeth treated with air-flow was observed under light wave interference microscope. Then the effect of prophylaxis paste on these surface were analyzed.

Surface roughness is one of the significant machining characteristics in the finish cut of WEDM.

The surface roughness increases first and then decreases as surface density increase.

The contribution of the guide surface roughness overshadows that of the fiber surface roughness.

The results demonstrate that when surface roughness increases, the load capacity and the frictional force of surface asperities increase, but the oil film-thickness ratio decreases.